XHE-66G-DEGH
Category:
Product Introduction

Key Advantages of 630w TOPCon Bifacial Module
|
Higher Power OutputUp to 590w output, lower LOCE and improving ROI. |
Low Temperature Rise CoefficientStable performance even in high-temperature environments. |
Higher Bifacial GainUp to 25% additional power generation from rear-side. |
Long-Term Warranty30-year linear power warranty ensures long-term reliability.
|
630W TOPCon Bifacial Module Specifications

| Module Type | XHE-605-66G-DEGH | XHE-610-66G-DEGH | XHE-615-66G-DEGH | XHE-620-66G-DEGH | XHE-625-66G-DEGH | XHE-630-66G-DEGH | |||||||
| STC | NOCT | STC | NOCT | STC | NOCT | STC | NOCT | STC | NOCT | STC | NOCT | ||
| Maximum Power | (Pmax/w) | 605 | 460 | 610 | 464 | 615 | 468 | 620 | 472 | 625 | 475 | 630 | 479 |
| Operating Voltage | (Vmp/v) | 40.63 | 38.76 | 40.8 | 38.92 | 40.97 | 39.09 | 41.14 | 39.25 | 41.31 | 39.41 | 41.47 | 39.56 |
| Operating Current | (Imp/A) | 14.89 | 11.87 | 14.95 | 11.92 | 15.01 | 11.97 | 15.07 | 12.02 | 15.13 | 12.06 | 15.19 | 12.11 |
| Open-Circuit Voltage | (Voc/v) | 48.54 | 46.09 | 48.72 | 46.26 | 48.9 | 46.44 | 49.08 | 46.61 | 49.26 | 46.78 | 49.44 | 46.95 |
| Short-Circuit Current | (Isc/A) | 15.83 | 12.75 | 15.9 | 12.81 | 15.97 | 12.87 | 16.04 | 12.92 | 16.11 | 12.98 | 16.18 | 13.04 |
| Module Efficiency | (%) | 22.4% | 22.6% | 22.8% | 23.0% | 23.1% | 23.3% | ||||||
N-type vs P-type Solar Cell Comparison
N-type solar technology offers higher efficiency,lower degradation, and better long-term performance compared with conventional P-type modules.
| Comparison Item | N-type TOPCon | P-type PERC |
| Cell Efficiency | Higher conversion efficiency | Relatively lower efficiency |
| Power Output | Higher module wattage potential | Lower output under the same module size |
| Degradation | Lower first-year & annual degradation rate | Higher annual degradation over lifetime |
| Temperature Performance | Better low-temperature coefficient & hot climate adaptability | Inferior performance under high ambient temperature |
| Bifacial Gain | Excellent rear-side power generation gain | Limited bifacial power generation performance |
| Energy Yield | Higher lifetime energy yield | Lower long-term energy production |
| LCOE | More competitive long-term LCOE | High lifetime LCOE |
| Project Value | Ideal for utility-scale & C&I solar projects | Suitable for cost-sensitive conventional projects |
Keywords:
XHE-66G-DEGH
Related Products
Related Case
Myanmar 160KW-400KWH energy storage system
Shanghai
Integrated Energy Storage System for Light, Energy Storage, and Energy Storage in Tazhan City, Vietnam
FAQ
What international certifications does the 620W XHE-66G-DEGH have?
It is fully certified to IEC 61215, IEC 61730, CE,etc. These certifications ensure compliance with global safety, performance and environmental requirements.
Does this panel have anti-PID (Potential Induced Degradation) protection?
Yes. It is designed with advanced anti-PID technology, ensuring minimal power loss even under high humidity and high temperature conditions throughout its 30-year service life.
What cell technology does the 620W XHE-72N-DEGH use?
It adopts 210R N-type TOPCon half-cut cells with 132-cell design. This advanced cell technology delivers higher efficiency, better low-light performance and lower internal resistance than traditional cell designs.
What are the dimensions and weight of the XHE-66G-DEGH 630W solar panel?
The XHE-66G-DEGH 630W panel measures 2384×1134×30mm and weighs approximately 33.9kg.
With this double-sided photovoltaic panel, how much additional energy can I expect to generate on the back side?
Under normal installation conditions, you can expect to gain 10% to 25% additional energy from the back side. In the best conditions (such as white gravel or snow-covered ground, and with an appropriate installation height), the gain can reach up to 30%.
Product Message



